Gravity Turn Maneuver

Gravity Turn Maneuver
State dimension:	1
Differential states:	5
Continuous control functions:	1
Interior point inequalities:	2
Interior point equalities:	7

The gravity turn or zero lift turn is a common maneuver used to launch spacecraft into orbit from bodies that have non-negligible atmospheres. The goal of the maneuver is to minimize atmospheric drag by always orienting the vehicle along the velocity vector. In this maneuver, the vehicle's pitch is determined solely by the change of the velocity vector through gravitational acceleration and thrust. The goal is to find a launch configuration and thrust control strategy that achieves a specific orbit with minimal fuel consumption.

Physical description and model derivation

For the purposes of this model, we start with the following ODE system proposed by Culler et. al. in [Culler1957]The entry doesn't exist yet.:

$\begin{array}{rcl} \dot{v} &=& \frac{F}{m} - g \cdot \cos \beta \\ v \dot{\beta} &=& g \cdot \sin{\beta} \end{array}$

where $v$ is the speed of the vehicle, $g$ is the gravitational acceleration at the vehicle's current altitude, $F$ is the accelerating force and $\beta$ is the angle between the vertical and the vehicle's velocity vector. In the original version of the model, the authors neglect aspects of the problem:

• Variation of $g$ over altitude
• Decrease of vehicle mass due to fuel consumption
• Curvature of the surface
• Atmospheric drag

Changes in gravitational acceleration

To account for changes in $g$, we make the following substitution:

$g = g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2$

where $g_0$ is the gravitational acceleration at altitude zero and $r_0$ is the distance of altitude zero from the center of the reference body.

Decrease in vehicle mass

To account for changes in vehicle mass, we consider $m$ a differential state with the following derivative:

$\dot{m} = -\frac{F}{I_{sp} \cdot g_0}$

where $I_{sp}$ is the specific impulse of the vehicle's engine. Specific impulse is a measure of engine efficiency. For rocket engines, it directly correlates with the engine's exhaust velocity and may vary with atmospheric pressure, velocity, engine temperature and combustion dynamics. For the purposes of this model, we will assume it to be constant.

The vehicle's fuel reserve is modelled by two parameters: $m_0$ denotes the launch mass (with fuel) and $m_1$ denotes the dry mass (without fuel).

Curvature of the reference body's surface

To accomodate the reference body's curvature, we introduce an additional differential state $\theta$ which represents the change in the vehicle's polar angle with respect to the launch site. The derivative is given by

$\dot{\theta} = \frac{v \cdot \sin \beta}{r_0 + h}.$

Note that the vertical changes as the vehicle moves around the reference body meaning that the derivative of $\beta$ must be changed as well:

$\dot{\beta} = \frac{g \cdot \sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h}.$

Atmospheric drag

To model atmospheric drag, we assume that the vehicles draf coefficient $c_d$ is constant. The drag force is given by

$F_{drag} = \frac{1}{2} \rho A c_d v^2$

where $\rho$ is the density of the atmosphere and $A$ is the vehicle's reference area. We assume that atmospheric density decays exponentially with altitude:

$\rho = \rho_0 \cdot e^{-\frac{h}{H}}$

where $\rho_0$ is the atmospheric density at altitude zero and $H$ is the scale height of the atmosphere. The [drag force] is introduced into the acceleration term:

$\dot{v} = \frac{F - F_{drag}}{m} - g \cdot \cos \beta.$

Note that if the vehicle is axially symmetric and oriented in such a way that its symmetry axis is parallel to the velocity vector, it does not experience any lift forces. This model is simplified. It does not account for changes in temperature and atmospheric composition with altitude. Also, $c_d$ varies with fluid viscosity and vehicle velocity. Specifically, drastic changes in $c_d$ occur as the vehicle breaks the sound barrier. This is not accounted for in this model.

Mathematical formulation

The resulting optimal control problem is given by

$\begin{array}{llcll} \displaystyle \min_{T, m, v, \beta, h, \theta, u} & m_0 - m(T) \\[1.5ex] \mbox{s.t.} & \dot{m} & = & -\frac{F_{max}}{I_{sp} \cdot g_0} \cdot u ,\\ & \dot{v} & = & (F - \frac{1}{2} \rho_0 \cdot e^{-\frac{h}{H}} A c_d v^2) \cdot \frac{1}{m} - g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cos \beta ,\\ & \dot{\beta} & = & g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cdot \frac{\sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h} ,\\ & \dot{h} & = & v \cdot \cos \beta ,\\ & \dot{\theta} & = & \frac{v \cdot \sin \beta}{r_0 + h},\\[1.5ex] & m(0) &=& m_0 , \\ & v(0) &=& \varepsilon , \\ & \beta(0) &\in& \left[ 0,\frac{\pi}{2} \right], \\ & h(0) &=& 0, \\ & \theta(0) &=& 0, \\[1.5ex] & \beta(T) &=& \hat{\beta} , \\ & h(T) &=& \hat{h} , \\ & v(T) &=& \hat{v} , \\[1.5ex] & m(t) &\in& [m_1, m_0] \qquad & \forall t \in [0,T] , \\ & v(t) &\geq& \varepsilon \qquad & \forall t \in [0,T] , \\ & \beta(t) &\in& [0, \pi] \qquad & \forall t \in [0,T] , \\ & h(t) &\geq& 0 \qquad & \forall t \in [0,T] , \\ & \theta(t) &\geq& 0 \qquad & \forall t \in [0,T] , \\[1.5ex] & u(t) &\in& [0,1] \qquad & \forall t \in [0,T] , \\ & T &\in& [T_{min}, T_{max}]. \end{array}$

where $F_{max}$ is the maximum thrust of the vehicle's engine and $\varepsilon$ is a small number that is strictly greater than zero. The differential states of the problem are $m, v, \beta, h, \theta$ while $u$ is the control function

Parameters

For testing purposes, the following parameters were chosen:

$\begin{array}{rcl} m_0 &=& 11.3 \; t \\ m_1 &=& 1.3 \; t \\ I_{sp} &=& 300 \; s \\ F_{max} &=& 0.6 \; MN \\ c_d &=& 0.021 \\ A &=& 1 \; m^2 \\[1.5ex] g_0 &=& 9.81 \cdot 10^{-3} \, \frac{km}{s^2} \\ r_0 &=& 600.0 \; km \\ H &=& 5.6 \; km \\ \rho_0 &=& 1.2230948554874 \; \frac{kg}{m^3} \\[1.5ex] \hat{\beta} &=& \; \frac{\pi}{2} \\ \hat{v} &=& 2.287 \; \frac{km}{s} \\ \hat{h} &=& 75 \; km \\[1.5ex] T_{min} &=& 120 \; s \\ T_{max} &=& 600 \; s \\ \varepsilon &=& 10^{-6} \; \frac{km}{s} \end{array}$

Reference solution

The reference solution was generated using a direct multiple shooting approach with 300 shooting intervals placed equidistantly along the variable-length time horizon. The resulting NLP was implemented using CasADi 2.4.2 using CVodes as an integrator and IPOPT as a solver. The exact code used to solve the problem alongside detailed solution data can be found under Gravity Turn Maneuver (Casadi). The solution achieves the desired orbit in $T = 338.042 \; s$ spending $m_0 - m(T) = 9.6508 \; t$ of fuel. The launch angle is approximately $\beta(0) = 2.7786081986275378 \cdot 10^{-6}$. The downrange motion throughout the entire launch amounts to a change in polar angle of approximately $\theta(T) = 0.3383474346340064 \approx 19.39^{\circ}$.

• Reference solution plots
• 

  Vehicle altitude over time.

• 

  Angle $\beta$ over time.

• 

  Vehicle mass over time.

• 

  Angle $\theta$ over time.

• 

  Vehicle velocity over time.

• 

  Discretized engine control over time.

• 

  Resulting vehicle trajectory relative to reference body surface.

Source Code

Model descriptions are available in

• Casadi code at Gravity Turn Maneuver (Casadi)

References

CULLER, Glen J.; FRIED, Burton D. Universal gravity turn trajectories. Journal of Applied Physics, 1957, 28. Jg., Nr. 6, S. 672-676.