Difference between revisions of "Gravity Turn Maneuver"

From mintOC
Jump to: navigation, search
(→‎Mathematical formulation)
 
(8 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
|nx        = 5
 
|nx        = 5
 
|nu        = 1
 
|nu        = 1
 +
|nc        = 11
 
|nri      = 2
 
|nri      = 2
 
|nre      = 7
 
|nre      = 7
Line 11: Line 12:
 
== Physical description and model derivation ==
 
== Physical description and model derivation ==
  
−
For the purposes of this model, we start with the following ODE system proposed by Culler et. al.:
+
For the purposes of this model, we start with the following ODE system proposed by Culler et. al. in <bib id="Culler1957" />:
  
 
<dd>
 
<dd>
Line 103: Line 104:
 
<math>
 
<math>
 
\begin{array}{llcll}
 
\begin{array}{llcll}
−
  \displaystyle \min_{T, m, v, q, h, d, u} & m_0 - m(T)  \\[1.5ex]
+
  \displaystyle \min_{T, m, v, \beta, h, \theta, u} & m_0 - m(T)  \\[1.5ex]
 
  \mbox{s.t.} & \dot{m} & = & -\frac{F_{max}}{I_{sp} \cdot g_0} \cdot u ,\\
 
  \mbox{s.t.} & \dot{m} & = & -\frac{F_{max}}{I_{sp} \cdot g_0} \cdot u ,\\
−
  & \dot{v} & = & \frac{F - \frac{1}{2} \rho_0 \cdot e^{-\frac{h}{H}} A c_d v^2}{m} - g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cos \beta(t) ,\\
+
  & \dot{v} & = & (F - \frac{1}{2} \rho_0 \cdot e^{-\frac{h}{H}} A c_d v^2) \cdot \frac{1}{m} - g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cos \beta ,\\
 
  & \dot{\beta} & = & g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cdot \frac{\sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h} ,\\
 
  & \dot{\beta} & = & g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cdot \frac{\sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h} ,\\
 
  & \dot{h} & = & v \cdot \cos \beta ,\\
 
  & \dot{h} & = & v \cdot \cos \beta ,\\
Line 128: Line 129:
 
</dd>
 
</dd>
  
−
where <math>F_{max}</math> is the maximum thrust of the vehicle's engine and <math>\varepsilon</math> is a small number that is strictly greater than zero. The differential states of the problem are <math> m, v, \beta, h, \theta </math> while <math> u </math> is the control function
+
where <math>F_{max}</math> is the maximum thrust of the vehicle's engine and <math>\varepsilon</math> is a small number that is strictly greater than zero.  
 +
The differential states of the problem are <math> m, v, \beta, h, \theta </math> while <math> u </math> is the control function
  
 
== Parameters ==
 
== Parameters ==
Line 179: Line 181:
  
 
== References ==
 
== References ==
−
 
+
<biblist />
−
CULLER, Glen J.; FRIED, Burton D. Universal gravity turn trajectories. Journal of Applied Physics, 1957, 28. Jg., Nr. 6, S. 672-676.
+
  
 
<!--List of all categories this page is part of. List characterization of solution behavior, model properties, ore presence of implementation details (e.g., AMPL for AMPL model) here -->
 
<!--List of all categories this page is part of. List characterization of solution behavior, model properties, ore presence of implementation details (e.g., AMPL for AMPL model) here -->
 
[[Category:MIOCP]]
 
[[Category:MIOCP]]
 
[[Category:ODE model]]
 
[[Category:ODE model]]
 +
[[Category:Aeronautics]]
 +
[[Category:Path-constrained arcs]]

Latest revision as of 09:29, 27 July 2016

Gravity Turn Maneuver
State dimension: 1
Differential states: 5
Continuous control functions: 1
Path constraints: 11
Interior point inequalities: 2
Interior point equalities: 7


The gravity turn or zero lift turn is a common maneuver used to launch spacecraft into orbit from bodies that have non-negligible atmospheres. The goal of the maneuver is to minimize atmospheric drag by always orienting the vehicle along the velocity vector. In this maneuver, the vehicle's pitch is determined solely by the change of the velocity vector through gravitational acceleration and thrust. The goal is to find a launch configuration and thrust control strategy that achieves a specific orbit with minimal fuel consumption.

Physical description and model derivation

For the purposes of this model, we start with the following ODE system proposed by Culler et. al. in [Culler1957]The entry doesn't exist yet.:

\begin{array}{rcl} \dot{v} &=& \frac{F}{m} - g \cdot \cos \beta \\ v \dot{\beta} &=& g \cdot \sin{\beta} \end{array}

where v is the speed of the vehicle, g is the gravitational acceleration at the vehicle's current altitude, F is the accelerating force and \beta is the angle between the vertical and the vehicle's velocity vector. In the original version of the model, the authors neglect aspects of the problem:

  • Variation of g over altitude
  • Decrease of vehicle mass due to fuel consumption
  • Curvature of the surface
  • Atmospheric drag

Changes in gravitational acceleration

To account for changes in g, we make the following substitution:

g = g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2
where g_0 is the gravitational acceleration at altitude zero and r_0 is the distance of altitude zero from the center of the reference body.

Decrease in vehicle mass

To account for changes in vehicle mass, we consider m a differential state with the following derivative:

\dot{m} = -\frac{F}{I_{sp} \cdot g_0}
where I_{sp} is the specific impulse of the vehicle's engine. Specific impulse is a measure of engine efficiency. For rocket engines, it directly correlates with the engine's exhaust velocity and may vary with atmospheric pressure, velocity, engine temperature and combustion dynamics. For the purposes of this model, we will assume it to be constant.

The vehicle's fuel reserve is modelled by two parameters: m_0 denotes the launch mass (with fuel) and m_1 denotes the dry mass (without fuel).

Curvature of the reference body's surface

To accomodate the reference body's curvature, we introduce an additional differential state \theta which represents the change in the vehicle's polar angle with respect to the launch site. The derivative is given by

\dot{\theta} = \frac{v \cdot \sin \beta}{r_0 + h}.

Note that the vertical changes as the vehicle moves around the reference body meaning that the derivative of \beta must be changed as well:

\dot{\beta} = \frac{g \cdot \sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h}.

Atmospheric drag

To model atmospheric drag, we assume that the vehicles draf coefficient c_d is constant. The drag force is given by

F_{drag} = \frac{1}{2} \rho A c_d v^2

where \rho is the density of the atmosphere and A is the vehicle's reference area. We assume that atmospheric density decays exponentially with altitude:

\rho = \rho_0 \cdot e^{-\frac{h}{H}}

where \rho_0 is the atmospheric density at altitude zero and H is the scale height of the atmosphere. The [drag force] is introduced into the acceleration term:

\dot{v} = \frac{F - F_{drag}}{m} - g \cdot \cos \beta.

Note that if the vehicle is axially symmetric and oriented in such a way that its symmetry axis is parallel to the velocity vector, it does not experience any lift forces. This model is simplified. It does not account for changes in temperature and atmospheric composition with altitude. Also, c_d varies with fluid viscosity and vehicle velocity. Specifically, drastic changes in c_d occur as the vehicle breaks the sound barrier. This is not accounted for in this model.

Mathematical formulation

The resulting optimal control problem is given by

\begin{array}{llcll} \displaystyle \min_{T, m, v, \beta, h, \theta, u} & m_0 - m(T) \\[1.5ex] \mbox{s.t.} & \dot{m} & = & -\frac{F_{max}}{I_{sp} \cdot g_0} \cdot u ,\\ & \dot{v} & = & (F - \frac{1}{2} \rho_0 \cdot e^{-\frac{h}{H}} A c_d v^2) \cdot \frac{1}{m} - g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cos \beta ,\\ & \dot{\beta} & = & g_0 \cdot \left(\frac{r_0}{r_0 + h}\right)^2 \cdot \frac{\sin{\beta}}{v} - \frac{v \cdot \sin \beta}{r_0 + h} ,\\ & \dot{h} & = & v \cdot \cos \beta ,\\ & \dot{\theta} & = & \frac{v \cdot \sin \beta}{r_0 + h},\\[1.5ex] & m(0) &=& m_0 , \\ & v(0) &=& \varepsilon , \\ & \beta(0) &\in& \left[ 0,\frac{\pi}{2} \right], \\ & h(0) &=& 0, \\ & \theta(0) &=& 0, \\[1.5ex] & \beta(T) &=& \hat{\beta} , \\ & h(T) &=& \hat{h} , \\ & v(T) &=& \hat{v} , \\[1.5ex] & m(t) &\in& [m_1, m_0] \qquad & \forall t \in [0,T] , \\ & v(t) &\geq& \varepsilon \qquad & \forall t \in [0,T] , \\ & \beta(t) &\in& [0, \pi] \qquad & \forall t \in [0,T] , \\ & h(t) &\geq& 0 \qquad & \forall t \in [0,T] , \\ & \theta(t) &\geq& 0 \qquad & \forall t \in [0,T] , \\[1.5ex] & u(t) &\in& [0,1] \qquad & \forall t \in [0,T] , \\ & T &\in& [T_{min}, T_{max}]. \end{array}

where F_{max} is the maximum thrust of the vehicle's engine and \varepsilon is a small number that is strictly greater than zero. The differential states of the problem are m, v, \beta, h, \theta while u is the control function

Parameters

For testing purposes, the following parameters were chosen:


\begin{array}{rcl} m_0 &=& 11.3 \; t \\ m_1 &=& 1.3 \; t \\ I_{sp} &=& 300 \; s \\ F_{max} &=& 0.6 \; MN \\ c_d &=& 0.021 \\ A &=& 1 \; m^2 \\[1.5ex] g_0 &=& 9.81 \cdot 10^{-3} \, \frac{km}{s^2} \\ r_0 &=& 600.0 \; km \\ H &=& 5.6 \; km \\ \rho_0 &=& 1.2230948554874 \; \frac{kg}{m^3} \\[1.5ex] \hat{\beta} &=& \; \frac{\pi}{2} \\ \hat{v} &=& 2.287 \; \frac{km}{s} \\ \hat{h} &=& 75 \; km \\[1.5ex] T_{min} &=& 120 \; s \\ T_{max} &=& 600 \; s \\ \varepsilon &=& 10^{-6} \; \frac{km}{s} \end{array}

Reference solution

The reference solution was generated using a direct multiple shooting approach with 300 shooting intervals placed equidistantly along the variable-length time horizon. The resulting NLP was implemented using CasADi 2.4.2 using CVodes as an integrator and IPOPT as a solver. The exact code used to solve the problem alongside detailed solution data can be found under Gravity Turn Maneuver (Casadi). The solution achieves the desired orbit in T = 338.042 \; s spending m_0 - m(T) = 9.6508 \; t of fuel. The launch angle is approximately \beta(0) = 2.7786081986275378 \cdot 10^{-6}. The downrange motion throughout the entire launch amounts to a change in polar angle of approximately \theta(T) = 0.3383474346340064 \approx 19.39^{\circ}.

  • Reference solution plots

  • Vehicle altitude over time.

  • Angle \beta over time.

  • Vehicle mass over time.

  • Angle \theta over time.

  • Vehicle velocity over time.

  • Discretized engine control over time.

  • Resulting vehicle trajectory relative to reference body surface.

Source Code

Model descriptions are available in

References

There were no citations found in the article.

Retrieved from "https://mintoc.de/index.php?title=Gravity_Turn_Maneuver&oldid=2110"