Difference between revisions of "Double Tank"

From mintOC
Jump to: navigation, search
(→‎Variants)
 
(23 intermediate revisions by 3 users not shown)
Line 6: Line 6:
 
}}
 
}}
  
−
The double tank problem is a basic example for a switching system. It contains the dynamics of an upper and a lower tank, connected to each other with a pipe. The goal is to minimize the deviation of a certain fluid level <math>k_2</math> in the lower tank. The problem was introduced and discussed in a variety of publications for the optimal control of constrained switched systems, e.g. [http://homepages.laas.fr/henrion/papers/switch.pdf Henrion et al.] and [http://epubs.siam.org/doi/pdf/10.1137/120901507 Vasudevan et al.]
+
The double tank problem is a basic example for a switching system. It contains the dynamics of an upper and a lower tank, connected to each other with a pipe. The goal is to minimize the deviation of a certain fluid level <math>k_2</math> in the lower tank. The problem was introduced and discussed in a variety of publications for the optimal control of constrained switched systems, e.g. <bib id="Henrion2014" /> (Link: [http://homepages.laas.fr/henrion/papers/switch.pdf Henrion et al.]) and <bib id="Vasudevan2013" /> (Link: [http://epubs.siam.org/doi/pdf/10.1137/120901507 Vasudevan et al.]).
  
 
== Mathematical formulation ==
 
== Mathematical formulation ==
  
 
<math>
 
<math>
−
\begin{array}{lll}
+
\begin{array}{llll}
−
  \displaystyle \min_{\sigma} &  \displaystyle \int_{0}^{T}k_1(x_2-k_2)^2 \; \text{d}t &\\[1.5ex]
+
  \displaystyle \min_{\sigma} &  \displaystyle \int_{0}^{T} & k_1(x_2-k_2)^2 \; \text{d}t\\[1.5ex]
−
  \mbox{s.t.} &  \displaystyle \dot{x}_1 = c_{\sigma(t)}-\sqrt{x_1}, \\[1.5ex]
+
  \mbox{s.t.} &  \dot{x}_1 & = c_{\sigma(t)}-\sqrt{x_1}, \\[1.5ex]
−
  &  \displaystyle \dot{x}_2 = \sqrt{x_1}-\sqrt{x_2}, \\[1.5ex]
+
  &  \dot{x}_2 & = \sqrt{x_1}-\sqrt{x_2}, \\[1.5ex]
−
  &  \displaystyle x_i(0)=x_{i0} \qquad &\text{for } i=1,2, \\[1.5ex]
+
  &  x(0) & = (2,2)^T, \\[1.5ex]
−
  &  \displaystyle \sigma(t) \in \{1,2\} \qquad &\text{for } t\in[0,T],\\[1.5ex]
+
  &  \sigma(t) & \in \{1,2\} \qquad &\text{for } t\in[0,T].\\[1.5ex]
 
\end{array}  
 
\end{array}  
 
</math>
 
</math>
Line 31: Line 31:
 
== Parameters ==
 
== Parameters ==
 
In an exemplary test, the parameters were chosen to be:
 
In an exemplary test, the parameters were chosen to be:
−
 
−
{| class="wikitable"
 
−
|+State variables
 
−
|-
 
−
|Symbol
 
−
|Initial value (<math>x_{i0}</math>)
 
−
|-
 
−
|<math>x_1(t)</math>
 
−
|<math>2</math>
 
−
|-
 
−
|<math>x_2(t)</math>
 
−
|<math>2 </math>
 
−
|}
 
−
 
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 67: Line 53:
 
|<math>10</math>
 
|<math>10</math>
 
|}
 
|}
−
 
  
 
== Reference Solution ==
 
== Reference Solution ==
−
The problem was solved in Matlab (version 2014b) with [[:Category: switch | Switch]]. The switch codes rely on [http://homepages.laas.fr/henrion/software/gloptipoly3/ GloptiPoly 3] and the solver [http://sedumi.ie.lehigh.edu/ SeDuMi 1.3] (optimization over symmetric cones).  
+
The problem is solved in Python with [[:Category: Gekko | GEKKO]] or Matlab (version 2014b) with [[:Category: switch | Switch]]. The switch codes rely on [http://homepages.laas.fr/henrion/software/gloptipoly3/ GloptiPoly 3] and the solver [http://sedumi.ie.lehigh.edu/ SeDuMi 1.3] (optimization over symmetric cones).  
−
By introducing the lifts <math>l_i=\sqrt{x_i}</math>, algebraically constrained as <math>l_i^2=x_i, \; l_i\geq 0,</math> the problem is recast with polynomial data. In this way way switch in connection with GloptiPoly3 can be applied. GloptiPoly 3 is a Matlab package developed by Didier Henrion for generalized problems of moments and needs polynomial input data. The exact code used to solve the problem can be found under [[Double Tank Problem (switch)]]. The calculated objective is 4.7296 with the following trajectories of states and controls:
+
By introducing the lifts <math>l_i=\sqrt{x_i}</math>, algebraically constrained as <math>l_i^2=x_i, \; l_i\geq 0,</math> the problem is recast with polynomial data. In this way way switch in connection with GloptiPoly3 can be applied. GloptiPoly 3 is a Matlab package developed by Didier Henrion for generalized problems of moments and needs polynomial input data. The exact code used to solve the problem can be found under [[Double Tank (switch)]]. The calculated objective is 4.7296 with the following trajectories of states and controls:
 
<gallery caption="Reference solution plots" widths="180px" heights="140px" perrow="2">
 
<gallery caption="Reference solution plots" widths="180px" heights="140px" perrow="2">
 
  Image:State_sequence_Tank.jpg| State trajectory over time.
 
  Image:State_sequence_Tank.jpg| State trajectory over time.
 
  Image:Control_sequence_Tank.jpg| Control sequence over time.
 
  Image:Control_sequence_Tank.jpg| Control sequence over time.
 
</gallery>
 
</gallery>
 +
 +
== Variants ==
 +
 +
There are several alternative formulations and variants of the above problem, in particular
 +
 +
* different control functions for the two tanks, see [[Double Tank multimode problem]]
 +
* a three tank problem with 3 modes, see [[Three Tank multimode problem]]
  
 
== Source Code ==
 
== Source Code ==
Line 81: Line 73:
 
Model descriptions are available in
 
Model descriptions are available in
  
 +
* [[:Category:Gekko | GEKKO Python code]] at [[Double Tank (GEKKO)]]
 
* [[:Category: switch | switch code]] at [[Double Tank (switch)]]
 
* [[:Category: switch | switch code]] at [[Double Tank (switch)]]
  
Line 94: Line 87:
 
[[Category:ODE model]]
 
[[Category:ODE model]]
 
[[Category: Tracking objective]]
 
[[Category: Tracking objective]]
 +
[[Category: State dependent switches]]
 +
[[Category:Bang bang]]
 +
[[Category:Path-constrained arcs]]

Latest revision as of 08:34, 14 March 2020

Double Tank
State dimension: 1
Differential states: 2
Discrete control functions: 1
Interior point equalities: 2


The double tank problem is a basic example for a switching system. It contains the dynamics of an upper and a lower tank, connected to each other with a pipe. The goal is to minimize the deviation of a certain fluid level k_2 in the lower tank. The problem was introduced and discussed in a variety of publications for the optimal control of constrained switched systems, e.g. [Henrion2014]The entry doesn't exist yet. (Link: Henrion et al.) and [Vasudevan2013]The entry doesn't exist yet. (Link: Vasudevan et al.).

Mathematical formulation

\begin{array}{llll} \displaystyle \min_{\sigma} & \displaystyle \int_{0}^{T} & k_1(x_2-k_2)^2 \; \text{d}t\\[1.5ex] \mbox{s.t.} & \dot{x}_1 & = c_{\sigma(t)}-\sqrt{x_1}, \\[1.5ex] & \dot{x}_2 & = \sqrt{x_1}-\sqrt{x_2}, \\[1.5ex] & x(0) & = (2,2)^T, \\[1.5ex] & \sigma(t) & \in \{1,2\} \qquad &\text{for } t\in[0,T].\\[1.5ex] \end{array}


The two states of the system correspond to the fluid levels of an upper and a lower tank. The output of the upper tank flows into the lower tank, the output of the lower tank exits the system, and the flow into the upper tank is restricted to either c_1 [lt/s] or c_2 [lt/s]. The dynamics in each mode are then derived using Torricelli’s law, as shown in constraints 1 and 2. The objective of the optimization is to have the fluid level in the lower tank equal to k_2 [m], as reflected in the cost function.

Parameters

In an exemplary test, the parameters were chosen to be:

Parameters
Symbol Value
k_1 2
k_2 3
c_1 1
c_2 2
T 10

Reference Solution

The problem is solved in Python with GEKKO or Matlab (version 2014b) with Switch. The switch codes rely on GloptiPoly 3 and the solver SeDuMi 1.3 (optimization over symmetric cones). By introducing the lifts l_i=\sqrt{x_i}, algebraically constrained as l_i^2=x_i, \; l_i\geq 0, the problem is recast with polynomial data. In this way way switch in connection with GloptiPoly3 can be applied. GloptiPoly 3 is a Matlab package developed by Didier Henrion for generalized problems of moments and needs polynomial input data. The exact code used to solve the problem can be found under Double Tank (switch). The calculated objective is 4.7296 with the following trajectories of states and controls:

  • Reference solution plots

  • State trajectory over time.

  • Control sequence over time.

Variants

There are several alternative formulations and variants of the above problem, in particular

Source Code

Model descriptions are available in

References

There were no citations found in the article. 

CLAEYS, Mathieu; DAAFOUZ Jamal; HENRION Didier Modal occupation measures and LMI relaxations for nonlinear switched systems control. arXiv preprint arXiv:1404.4699 (2014)

VASUDEVAN, Ramanarayan, et al. Consistent Approximations for the Optimal Control of Constrained Switched Systems---Part 2: An Implementable Algorithm. SIAM Journal on Control and Optimization, 2013, 51. Jg., Nr. 6, S. 4484-4503.
Retrieved from "https://mintoc.de/index.php?title=Double_Tank&oldid=2326"